LightCONEX LC 50G and 150G active plug-in module for VPX systems

The LightCONEX® solution for VPX systems is a revolutionary active blind mate optical interconnect that includes a fixed active plug-in module connector and a floating backplane connector all compatible with the forthcoming VITA 66.5 standard.

Click on the image to go to the LightCONEX page.

LightCONEX LC 150G (dull duplex) active plug-in module for VPX systems

The LightCONEX® solution for VPX systems is a revolutionary active blind mate optical interconnect that includes a fixed active plug-in module connector and a floating backplane connector all compatible with the forthcoming VITA 66.5 standard.

Click on the image to go to the LightCONEX page.

LightABLE LM 50G and 150 Gbps embedded transceiver with microcontroller
-Surface mount

The LightABLE^™ LM 50G with integrated microcontroller is a low profile optical transceiver that includes 4 transmit and 4 receive lanes in a parallel fiber configuration, whereas the LightABLE^™ LM 150G includes 12 transmit or 12 receive lanes in a parallel fiber configuration. These components are mounted directly on a high-speed printed circuit board via surface mount technology.

Click on the image to go to the LightABLE LM page.

LightABLE LM 50G and 150 Gbps embedded transceiver with microcontroller
-Pluggable

The LightABLE^™ LM 50G with integrated microcontroller is a low profile optical transceiver that includes 4 transmit and 4 receive lanes in a parallel fiber configuration, whereas the LightABLE^™ LM 150G includes 12 transmit or 12 receive lanes in a parallel fiber configuration. These components are mounted directly on a high-speed printed circuit boar via a MEG-array connector.

Click on the image to go to the LightABLE LM page.

LightABLE LL 150G (full duplex)
-Screw-in

The LightABLE™ LL 150G is a a (12+12)-lane low profile screw-in module (4.5 mm) that mounts to the board via an LGA connector. This modules operate at 12.5 Gbps per lane from −40 °C to 100 °C at ultra-low bit error rates of 10-15. The optical module includes equalizers and pre-emphasis to compensate long traces; these features can be turned off for short traces (less than 10 cm) to reduce power consumption.

Click on the image to go to the LightABLE LL page.

LightVISION VM industrial optical module with MPO interface  
-Board-edge mount

The LightVISION™ VM is a  screw-in, robust industrial and RoHS optical module with MPO interface. This combination allows a standard MPO cable to be plugged into the optical module and also mounted on the face-plate of a box or line-card. This approach offers a standard MPO cable connection with a robust, board mounted optical engine providing small size (footprint) and convenient optical cabling at the same time.

Click on the image to go to the LightVISION page.

LightVISION VM industrial optical module with MPO interface  
-Mid-board mount

The LightVISION™ VM is a  screw-in, robust industrial and RoHS optical module with MPO interface.

This combination allows a standard MPO cable to be plugged into the optical module and also mounted on the face-plate of a box or line-card. This approach offers a standard MPO cable connection with a robust, board mounted optical engine providing small size (footprint) and convenient optical cabling at the same time.

Click on the image to go to the LightVISION page.

LightABLE28 SL 100G (full duplex) rugged transceiver
-Screw-in

The LightABLE28 LL low profile screw-in module (4.5 mm) mounts to the board via an LGA connector. It is offered as a (4+4)-lane transceiver that operates at 28 Gbps per lane from −40 °C to 85 °C at ultra-low bit error rates of 10-12.

Click on the image to go to the LightABLE28 page.

SpaceABLE28 SL 100G (full duplex) radiation resistant optical transceiver
-Screw-in

The SpaceABLE28™ SL radiation resistant transceivers are engineered to withstand radiation doses >100 krad (Si). The SpaceABLE28 SL embedded optical modules are rugged devices offering high bandwidth (greater than 100 Gbps, full duplex) in a chip-size package.

Click on the image to go to the SpaceABLE28 page.

LightABLE LL 50G (full duplex) and 150 Gbps rugged transceivers
-Screw-in

The LightABLE™ LL low profile screw-in module (4.5 mm) mounts to the board via an LGA connector. It is offered as a (4+4)-lane transceiver, a 12-lane transmitter, or a 12-lane receiver, and a (12+12)-lane transceiver. All modules operate at 12.5 Gbps per lane from −40 °C to 100 °C at ultra-low bit error rates of 10-15.

Click on the image to go to the LightABLE LL page.

SpaceABLE LL 50G (full duplex) and 150 Gbps radiation resistant transceivers
-Screw-in

The low profile radiation resistant SpaceABLE™ SL screw-in module (4.5 mm) mounts to the board via an LGA connector. It is offered as a (4+4)-lane transceiver, a 12-lane transmitter, or a 12-lane receiver. All modules operate at 12.5 Gbps per lane from −40 °C to 100 °C at ultra-low bit error rates of 10-15. 

Click on the image to go to the SpaceABLE LL page.